Wireless Door/Window Sensors, GEN3 (Pair) by Kadtronix

These are add-on sensors for our HVAC Smart Relay Switch (HSRS), RF wireless model, GEN3. Ideal for installations where traditional wiring isn't feasible. Sold in pairs, these sensors come in two models: G3-Mini and G3-Basic. The mini sensor has a 50 ft. range and uses a CR2032 coin-cell, while the basic sensor has a 65 ft. range and includes a CR123A battery. Both are pre-programmed with unique, permanent addresses. The mini sensor measures 2.2 x 1 x 0.25 inches and includes foam mounting tape, while the basic sensor measures 3.1 x 1.6 x 1.2 inches and includes foam mounting tape and screws. Note that GEN2 and GEN3 products are not cross-compatible. The G3-basic sensor has wired contact screw terminals for external switches, which should be disabled if not used. Wireless signal strength can vary based on installation conditions. These sensors are expandable, battery-operated, and easy to mount. Each set includes two transmitters, two magnets, double-sided foam tape, and screws (except for the G3-Mini). The G3-Mini requires a CR2032 coin-cell, and the G3-Basic requires a CR123A battery.

• Complementary Sensors for HVAC Smart Relay Switch (HSRS), RF Wireless Model GEN3: Ideal for installations where traditional wiring is impractical or inconvenient. Sold in pairs
• GEN3 Sensors: Two variants available - mini and basic. Mini offers 50 ft. range, uses CR2032 coin-cell, measures 2.2H x 1W x 0.25D. Basic offers 65 ft. range, includes CR123A cell, measures 3-1/16H x 1-9/16W x 1-3/16D
• Compatibility Note: GEN2 and GEN3 are not interchangeable due to different radio frequencies
• G3-Basic Sensor Input: Wired contact screw terminals for optional switch or loop. Disable if not used to prevent false triggers
• RF Range: Ideal conditions yield optimal results. Real-life performance varies due to interference, walls, appliances, etc
• Expandable Design: Supports up to 8 wireless sensors
• HSRS System Compatibility: Wireless model
• Power Source: Battery-operated
• Mounting: Simple and easy
• Included Accessories: 2 door/window transmitters, 2 magnets, double-sided foam tape, screws (except G3-Mini)
• Power Requirements: G3-Mini - 1 CR2032 coin-cell, G3-Basic - 1 CR123A battery
• Technical Sheets: Mini (GEN3), Basic (GEN3)